MyPBX Standard Administrator Guide
34
Direct Outward Dialing Number.
The extension make call out via BRI Trunk will display the
associated DOD.
Add a DOD
Fill in DOD number and choose associated extension, then click to
add one DOD number.
Add Bulk DOD
Click to add DOD numbers in bulk.
Figure 6-6 Add Bulk DOD
Add bulk DOD for bulk extensions in ascending sequencewith the “Begin DOD” you fill
in. For example, if the Associated Extensions are 100, 101, 102, 103, 104, 105 with
“Begin DOD” as 5500100, the corresponding DOD will be 5500100, 5500101,
5500102, 5500103, 5500104, and 5500105.
GSM/UMTS/CDMA Trunks
GSM/UMTS/CDMA trunks are supported in MyPBX Standard if you have got the
GSM/UMTS/CDMA module and SIM cards installed. One GSM/UMTS/CDMA trunk
supports only one SIM card for one concurrent call.
Click to edit the GSM/UMTS/CDMA trunk.
Please check the GSM/UMTS/CDMA configuration parameters below.
Table 6-13 GSM/UMTS/CDMA Trunk Configurations
Enter the SIM card PIN code if the card has a PIN code.