MyPBX Standard Administrator Guide
100
Text content supports predefined variables. Variable names and
corresponding instructions are as follows:
$(HOSTNAME) Host name
$(LOCALIP) Local IP address
$(SOURCEIP) Attack source IP address
$(DATETIME) Occurred
$(USERNAME) User name (WEBLOGIN effective)
$(DESTMAC) Attacks destination MAC (IPATTACK
effective)
$(DESTPORT) Attacks destination Port number (IPATTACK
effective)
$(PROTOCOL) Protocol type (IPATTACK effective)
$(INTERFACE) Network interface name (IPATTACK
effective)
Certificates
MyPBX supports TLS extension. Before you register a TLS extension on IP phone,
you should upload certificates first.
Figure 19-12 Upload Certificate
Trusted Certificate
This certificate is a CA certificate. When selecting “TLS Verify Client” as “Yes”,
you should upload a CA. The relevant IP phone should also have this certificate.
PBX Certificate
This certificate is server certificate. No matter selecting “TLS Verify Client”
as “Yes” or “NO”, you should upload this certificate to MyPBX. If IP phone
enables “TLS Verify server”, you should also upload the relevant CA certificate on
IP phone.
To Next Page
Loading...
