Yeastar Technology MyPBX Standard Administrator's Guide

MyPBX Standard Administrator Guide
19
Provisioning
MyPBX provides Phone Provisioning and Neogate Provisioning features, which help
users to configure the phones and gateways in bulk, which saves time substantially.
 Provisioning Methods
 Phone Provisioning
 Gateway Provisioning
Provisioning Methods
MyPBX supports provisioning in PnP mode and DHCP mode.
 PnP
1. The IP phone or VoIP gateway broadcast SIP SUBSCRIBE message when
boots up.
2. MyPBX reply with SIP message NOTIFY and indicate the provisioning URL.
3. The IP phone or VoIP gateway use the path to download the configuration file,
resolve and apply the configurations written in the configuration file.
 DHCP
Use DHCP method, you should set your SIP phone or VoIP gateway as a DHCP
client and enable MyPBX DHCP server to set it as a DHCP server.
1. The IP phone or VoIP gateway get IP address from MyPBX.
2. MyPBX assign an IP address and indicate the provisioning URL.
3. The IP phone or VoIP gateway download configuration file, resolve and apply
the configurations written in the configuration file.
Phone Provisioning
Phone Provisioning feature is applicable to mainstream IP phone on the market, like
Yealink, Polycom, Cisco, Grandstream, snom, Fanvil, Aastra, and Panasonic.
General Settings for Yealink
MyPBX provides general settings for Yealink IP phones. General configurations will
apply to the selected Yealink phone no matter which device model it is.You can
configure the general settings before provisioning Yealink IP phones, including
general preferences, codecs, remote phone book and firmware upgrade.

Yeastar Technology MyPBX Standard Specifications

General

Brand	Yeastar Technology
Model	MyPBX Standard
Category	PBX
Language	English