Yeastar Technology MyPBX Standard Administrator's Guide

MyPBX Standard Administrator Guide
42
PIN Settings
Go to PBX→Advanced Settings→ PIN Settings to create a PIN list. The PIN lists
can be selected to access restricted features.The PIN can also be added to the CDR
record’s “Account Code” field. PIN list can be applied to Outbound Route.
Figure 7-7 PIN Settings
Blacklist
Blacklist is used to block an incoming/outgoing call.If the number of incoming or
outgoing call is listedin the number blacklist, the caller will hear the following prompt:
“The number you have dialed is not in service. Please check the number and try
again”.The system will then disconnect the call.
Go to PBX→Advanced Settings→Blacklistto add numbers to the blacklist.
You can choose to block the number for inbound, outbound or both.
 If the type is “inbound”, then this number can’t be called.
 If the type is “outbound”, then the extensions in MyPBX Standard can’t call this
number.
Figure 7-8 Number Blacklist

Yeastar Technology MyPBX Standard Specifications

General

Brand	Yeastar Technology
Model	MyPBX Standard
Category	PBX
Language	English