Yeastar Technology MyPBX Standard - Getting Started; Accessing Web GUI

MyPBX Standard Administrator Guide
8
Getting Started
In this chapter, we guide you through the basic steps to start with a new MyPBX
Standard:
 Accessing Web GUI
 Web Configuration Panel
 User Management
 Making and Receiving Calls
Accessing Web GUI
MyPBX Standard provides web-based configuration interface for administrator and
account user. The user can manage the device by logging in the Web interface.Check
the factory defaultsbelow:
IP address: http://192.168.5.150
User Name: admin
Default Password: password
1. Start the browser on PC. In the address bar, enter the IP address, click
“Enter”button and then you can see the Web Configuration Panel login page.
2. Enter the Admin User Name and Password to log in.
Figure 3-1 MyPBX Standard Web Configuration Panel Login Page
Note:
It is highly recommended that you change the default password on first login.