Yeastar Technology MyPBX Standard Administrator's Guide

MyPBX Standard Administrator Guide
65
Call Features
This chapter shows various call features on MyPBX Standard:
 Feature Code
 Call Transfer
 Call Pickup
 Spy
 Call Parking
 Speed Dialing
 PIN User
 Callback
 DISA
 DNIS
Feature Code
Feature Codes are used to enable and disable certain features available in MyPBX
Standard. MyPBX Standard local users can dial feature codes on their phones to use
a particular feature.
The default feature codes can be checked and changed onPBX→Basic
Settings→Feature Codespage.
1) General
Table15-1 Feature Code-General
General
One Touch Record
Default Code: *1.
A user may initiate or stop call recording by dialing the code
during a call.
Check Extension
Voicemail
Default Code: *2.
Users could check their own voicemails by this code.
Voicemail for Extension
Default Code: #.
Users can leave a voicemail to other extensions by dialing #
on their phone or the incoming call could be forwarded to an
extension’s voicemail directly. (# is the default setting). For
example, extension 500 want to leave a message for
extension 501, users can use 500 dial “#501” to enter the
voicemail of 501.
Voicemail Main Menu
Default Code: *02.
Attended Transfer
Default Code: *3.
Attended Transfer Timeout:
The timeout value of transferring a call.

Yeastar Technology MyPBX Standard Specifications

General

Brand	Yeastar Technology
Model	MyPBX Standard
Category	PBX
Language	English