Yeastar Technology MyPBX Standard Administrator's Guide

MyPBX Standard Administrator Guide
71
assigned to users in factory have no permission to make international calls(factory
extensions are not selected in the international outbound route).
In this case, PIN User feature on MyPBX can help the manager to make international
calls from an extension which is not selected on the international outbound route. He
can dial PIN User feature code (default *89) on the phone first, then enter a PIN code
following by the prompt. If the PIN code is correct, he could make international calls on
the IP phone placed in factory.
Figure 15-3 PIN User
 Access Code
Dial this code to enable PIN User feature.
 Prompt for Entry
Choose a prompt to ask the user to enter a PIN code.
 Prompt for Entry Failure
Choose the error prompt to play when the user enters a wrong PIN code.
Click to add a PIN User.
Figure 15-4 Add PIN User
 Name
Set a name for the PIN user.
 PIN
Select PIN lists from PIN settings.

Yeastar Technology MyPBX Standard Specifications

General

Brand	Yeastar Technology
Model	MyPBX Standard
Category	PBX
Language	English