● Revision of CPU module
Before starting debugging using in-house test equipment, check the revision of the
FCN/FCJ Basic Software (OS) stored on the CPU module.
When testing using in-house equipment, the FCN/FCJ OS stored on the CPU
module may not be of the latest revision and thus should be checked.
• How to check revision of system card
Connect to the FCN/FCJ Maintenance homepage using a Web browser to
display the Top Page as shown in the figure below.
On the Top Page, check the displayed OS Revision and BootROM Revision,
which are enclosed within a blue box below.
After determining the revision of the CPU module of the in-house test equipment,
check whether it matches the revisions of the tools verified in Section 2.2.1,
“Checking Revisions of FCN-500, FCN-RTU and Tools.”
If the revisions differ, upgrade or downgrade accordingly to match the revisions.
To Next Page
Loading...
