7-12
IM WT3001E-51EN
7.3 Setting the Number of Displayed Items, Page
Scrolling the Display
Procedure
START STOP
REMOTE
CAL
SENSOR RATIO
MEASURING
RMS MEAN DC RMEAN
CURRENT RANGE VOLTAGE RANGE
MEASURING
RMS MEAN DC RMEAN
ALL
INPUT INFO.
LOWER ITEM LOWER FORM ALL USER SET
DISPLAY
ITEM & ELEMENT
2
3 4
COMPEN
ELEMENT
ELEMENT
1
WIRING
MODE AUTO MODE
AUTO
EXT SENSOR
NUMERIC
WAVE
OTHERS
ITEM
FORM
U / I / P
WP/q/
TIME
USER
ELEMENT
UPDATE
RATE
HOLD
SINGLE
INTEG
LOCAL
SHIFT
RESET SET
PAGE PAGE
Cursor keys
To exit the menu during
operation, press ESC located
above the soft keys.
In the procedural explanation
below, the phrase “press the
cursor keys” may be used.
This phrase refers to the
procedures for selecting
items and entering values
and character strings. For
details on the procedures,
see section 3.14 in the User’s
Manual, IM WT3001E-01EN.
• Selecting the Number of Displayed Items or List Display
1.
Press FORM to display the Numeric Form menu.
2.
Select one of the soft keys from 4 Items to Dual List to select the number of
displayed items or list display.
• Page Scrolling the Display (PAGE
key)
• When Numeric Form (the Number of Displayed Items) Is 4 Items, 8 Items, or
16 Items
3.
Press PAGE or PAGE to scroll the page.
• Press PAGE to display the next page.
• Press PAGE to display the previous page.
• When Numeric Form (the Number of Displayed Items) Is ALL Items
3
Press PAGE or PAGE to scroll the page.
• The first page is always displayed in the top half of the screen.
• Press PAGE to display the next page in the lower half of the screen.
• Press PAGE to display the previous page in the lower half of the screen.
* If numeric data is displayed on the split display, pages 1 to 9 are scrolled in the top
half of the screen.
To Next Page
Loading...
