Zebra 105SL Plus User Manual

175
Index
7/3/13 P1056468-002
network settings
load defaults
ways to initiate, 93
when exiting Setup mode, 19
reset network
user menu item, 35
ways to reset, 99
NO MOTION
how to set as head-close action, 92
how to set as power-up action, 92
non-continuous media
described, 47
problem with labels, 147
selecting media type, 85
O
odometers
non-resettable counter
description, 90
user menu item, 24
print readings
how to print, 90
user menu item, 24
print user-controlled counters, 90
user-controlled counters
counter 1 menu item, 24
counter 2 menu item, 24
how to change, 90
operating conditions, 39
optional features, 160
ordering replacement parts, 124
P
parallel communications
user menu item, 27
ways to set, 103
parallel port
characteristics of parallel connection, 41
parity
user menu item, 28
ways to set, 104
password
default, 20
disable, 20
select password protection level
how to set, 95
user menu item, 35
PAUSE button
FEED and PAUSE self test, 154
location, 16
PAUSE self test, 150
Peel-Off mode
description and media path, 52
how to select, 84
select print mode through user menu, 21
perforated media, 47
physical specifications, 162
platen roller
cleaning, 126
when to clean, 125
power
connect to power source, 43
power cord specifications, 44
site selection, 39
Power-On Self Test (POST), 148
power-up action
how to change, 92
user menu item, 29
primary network
how to select, 96
user menu item, 32
print configuration label
CANCEL self test, 149
print darkness setting, 83
print information
how to print various printer information, 91
LIST ALL user menu item, 26
print method
how to specify, 85
user menu item, 22
print mode
how to select, 84
user menu item, 21
print quality
bar code does not scan, 138
effect of printhead toggle pressure, 119
running FEED self test, 151
troubleshooting, 136

Zebra 105SL Plus Specifications

General

Weight	50 lbs / 22.7 kg
Humidity	20-85% non-condensing
Print Method	Thermal Transfer
Resolution	203 dpi (8 dots/mm)
Max Print Width	4.09 inches / 104 mm
Max Print Speed	12 inches per second / 305 mm per second
Memory	16 MB SDRAM, 8 MB Flash
Media Width	0.79 inches / 20 mm to 4.5 inches / 114 mm
Media Thickness	0.003 inches / 0.076 mm to 0.012 inches / 0.305 mm
Media Types	Continuous, die-cut, black mark
Ribbon Width	2.00 inches / 51 mm to 4.33 inches / 110 mm
Ribbon Length	1476'/450 m
Connectivity	Parallel, Serial
Optional Connectivity	Ethernet, Wireless
Power Requirements	90-264 VAC; 48-62 Hz
Operating Temperature	40°F to 105°F / 5°C to 40°C
Storage Temperature	-40°F to 140°F / -40°C to 60°C