EasyManuals Logo

Zebra 105SL Plus User Manual

Zebra 105SL Plus
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #176 background imageLoading...
Page #176 background image
Index
176
P1056468-002 7/3/13
print server
active print server
how to interpret, 96
user menu item, 33
characteristics of wired connection, 41
characteristics of wireless connection, 42
default gateway
user menu item, 34
ways to view or set, 98
ESSID
user menu item, 34
ways to view, 99
IP address
user menu item, 33
ways to view or set, 97
IP protocol
how to change, 97
user menu item, 33
MAC address
user menu item, 34
ways to view, 98
network configuration label
sample label, 149
ways to print, 91
primary network
user menu item, 32
reset network settings
user menu item, 35
ways to reset, 99
subnet mask
user menu item, 34
ways to view or set, 98
print specifications, 163
print speed
how to select, 83
user menu item, 21
print width
how to adjust, 85
user menu item, 22
printer configuration label
user menu item, 25
ways to print, 91
printer diagnostics, 148
printer locks up, 147
printer settings
darkness, 83
date, 32
label left position, 87
label top position, 87
maximum label length, 86
media type, 85
print method, 85
print mode, 84
print speed, 83
print width, 85
reprint mode, 88
settings not taking effect, 147
tear-off position, 84
time, 32
printhead
cleaning, 126
cleaning interval
how to specify, 89
user menu item, 23
life expectancy
how to specify, 89
user menu item, 23
pressure adjustment, 119
when to clean, 125
protocol
how to change, 105
user menu item, 28
R
Real-Time Clock (RTC)
date, 95
date setting on control panel, 32
time, 95
time setting on control panel, 32
recycling printer parts, 124
reflective sensor
selecting through user menu, 22
ways to select, 102
registration loss during printing, 136
registration problems, 144
relative humidity
operating, 39
storing the printer, 38
reload last saved settings, 93
remove media liner from rewind spindle, 113
replacement parts, 124
report shipping damage, 38
reprint mode
how to set and use, 88
user menu item, 31

Table of Contents

Other manuals for Zebra 105SL Plus

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zebra 105SL Plus and is the answer not in the manual?

Zebra 105SL Plus Specifications

General IconGeneral
Weight50 lbs / 22.7 kg
Humidity20-85% non-condensing
Print MethodThermal Transfer
Resolution203 dpi (8 dots/mm)
Max Print Width4.09 inches / 104 mm
Max Print Speed12 inches per second / 305 mm per second
Memory16 MB SDRAM, 8 MB Flash
Media Width0.79 inches / 20 mm to 4.5 inches / 114 mm
Media Thickness0.003 inches / 0.076 mm to 0.012 inches / 0.305 mm
Media TypesContinuous, die-cut, black mark
Ribbon Width2.00 inches / 51 mm to 4.33 inches / 110 mm
Ribbon Length1476'/450 m
ConnectivityParallel, Serial
Optional ConnectivityEthernet, Wireless
Power Requirements90-264 VAC; 48-62 Hz
Operating Temperature40°F to 105°F / 5°C to 40°C
Storage Temperature-40°F to 140°F / -40°C to 60°C

Related product manuals