EasyManua.ls Logo

Zebra CC600 - Photo Settings; Video Settings

Zebra CC600
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Applications
51
Photo Settings
Selfie Flash - Turns screen white to help produce a little extra light in dimmer settings. Options: Off
(default), or On.
Picture size - Set the size (in pixels) of the photo to: 5M pixels (default), 3M pixels, HD1080, 2M
pixels, HD720, 1M pixels, WVGA, VGA, or QVGA.
Picture quality - Set the picture quality setting to: Low, Standard (default) or High (default).
Countdown timer - Set to: Off (default), 2 seconds, 5 seconds or 10 seconds.
Storage – Set location to store the photo to: Phone or SD Card.
Continuous Shot - Select to take a series of photos quickly while holding the capture button. Off
(default) or On.
Face Detection - Select to turn face detection Off (default) or On.
ISO - Set how sensitive the camera is to light. Options: Auto (default), ISO Auto (HJR), ISO100,
ISO200, ISO400, ISO800 or ISO1600.
Exposure - Touch to adjust the exposure settings. Options: +2, +1,
0 (default), -1 or -2.
White balance - Select how the camera adjusts colors in different kinds of light, to achieve the most
natural-looking colors:
Incandescent - Adjust the white balance for incandescent lighting.
Fluorescent - Adjust the white balance for florescent lighting.
Auto - Adjust the white balance automatically (default).
Daylight - Adjust the white balance for daylight.
Cloudy - Adjust the white balance for a cloudy environment.
Redeye reduction - Helps eliminate redeye effect. Options: Disabled (default), or Enable.
ZSL - Set the camera to immediately take a picture when the button is pressed (default – enabled)
Selfie Mirror - Select to save a mirror image of the photo. Options: Disable (default), or Enable.
Shutter Sound - Select to play a shutter sound when taking a photo. Options: Disable (default) or
Enable.
Anti Banding - Allows the camera to avoid problems caused by artificial light sources that are not
constant. These sources cycle (flicker) fast enough to go unnoticed to the human eye, appearing
continuous. The camera’s eye (its sensor) can still see this flicker. Options: Auto (default), 60 Hz, 50
Hz, or Off.
Video Settings
In Video mode, video settings appear on screen. Touch to display the video settings options.
Video quality - Set video quality to: HD1080 (default), HD 720p (default), SD 480p, VGA, CIF, or
QVGA.
Video duration - Set to: 30 seconds (MMS) or 30 minutes (default).
Storage – Set the location to store the photo to: Phone (default) or SD Card.

Table of Contents

Other manuals for Zebra CC600

Related product manuals