Wireless
90
1.
Go to Settings.
2. Touch Network & internet > Wi-Fi.
3. Slide the Wi-Fi switch to the On position.
4. In the network dialog box, select and touch a network.
5. Touch to edit the network details.
6. Touch the down arrow to hide the keyboard.
7. Touch Advanced options.
8. Touch Proxy and select Manual.
9. In the Proxy hostname text box, enter the address of the proxy server.
10. In the Proxy port text box, enter the port number for the proxy server.
11. In the Bypass proxy for text box, enter addresses for web sites that are not required to go through the
proxy server. Use a comma “,” between addresses. Do not use spaces or carriage returns between
addresses.
12. Touch Save.
13. Touch Connect.
14. Touch the Home button.
Configuring the Device to Use a Static IP Address
By default, the device is configured to use Dynamic Host Configuration Protocol (DHCP) to assign an
Internet protocol (IP) address when connecting to a wireless network.
1. Go to Settings.
2. Touch Network & internet > Wi-Fi.
3. Slide the Wi-Fi switch to the On position.
4. In the network dialog box, select and touch a network.
5. Touch to edit the network details.
6. Touch the down arrow to hide the keyboard.
7. Touch Advanced options.
8. Touch IP settings and select Static.
9. In the IP address text box, enter an IP address for the device.
10. If required, in the Gateway text box, enter a gateway address for the device.
11. If required, in the Network prefix length text box, enter the prefix length.
12. If required, in the DNS 1 text box, enter a Domain Name System (DNS) address.
13. If required, in the DNS 2 text box, enter a DNS address.
14. Touch Save.
To Next Page
Loading...
Need help?
General
