Routine Maintenance
Cleaning Schedule and Procedures
208
P1095460-001 ZT510 User Guide 6/28/17
8-c. On the back of the cutter module, rotate the cutter motor thumbscrew to fully
expose the cutter blade.
8-d. If you disconnected the wires that connect the cutter module to the printer,
reconnect them.
8-e. Align the cutter assembly tabs (1) and cutter cover tabs (2) with the corresponding
slots (
3) in the printer, and then slide the cutter assembly back into the printer.
Take care not to damage the wires that connect the cutter module to the printer.
To Next Page
Loading...