209
Routine Maintenance
Cleaning Schedule and Procedures
6/28/17 ZT510 User Guide P1095460-001
9. Using the swab from the Preventive Maintenance Kit (part number 47362), wipe along the
upper cutting surface and the cutter blade. In place of the Preventive Maintenance Kit, you
may use a clean swab dipped in 99.7% isopropyl alcohol. Allow the solvent to evaporate.
8-f. Slide the cutter module to the left, and then reinstall the cutter mounting screw.
8-g. Continue with step 9.
To Next Page
Loading...