Zebra ZT510 - Page 264

Specifications
General Specifications
264
P1095460-001 ZT510 User Guide 6/28/17
Communication
Interfaces
(continued)
Optional
(continued)
USB host port
See Using a USB Host Port and the NFC Capabilities on page 247
for more information.
Limitations and Requirements
You can only plug one device into the USB host port. You
cannot use a third device by plugging it into a USB port on one
of the devices, nor can you use an adapter to split the USB host
port on the printer to accept more than one device at a time.
Connections and Configuration
No additional configuration is necessary.
IEEE 1284 Bidirectional Parallel data interface
Limitations and Requirements
• Maximum cable length of 10 ft (3 m).
• Recommended cable length of 6 ft (1.83 m).
• No printer parameter changes required to match the host
computer.
• Can be installed in either the top or bottom option slot.
Connections and Configuration
No additional configuration is necessary.
External ZebraNet 10/100 Print Server
Requires the parallel data interface option
Memory 1 Gigabyte DRAM (32 MB user available)
2 Gigabyte Flash (512 MB user available on-board Flash)