Routine Maintenance
Cleaning Schedule and Procedures
220
P1088680-001 ZT600 Series™ User Guide 5/22/17
6.
7.
Is the cutter blade fully exposed?
Caution • The cutter blade is sharp. Do not touch or rub the blade with your fingers.
Remove the cutter shield.
If the blade is… Then… (d1_CellHead_Left)
Lowered Continue with step 8 to remove the cutter module from the
printer so that you can rotate the blade upward.
Fully exposed Skip to step 9 on page 223.
Blade in lowered position Blade fully exposed
To Next Page
Loading...