Printer Setup and Operation
Load the Media—Cutter Mode or Delayed Cut Mode
56
P1088680-001 ZT600 Series™ User Guide 5/22/17
7. Does the media that you are using require ribbon for printing? If you are not sure, see
When to Use Ribbon on page 24.
8. Rotate the printhead-open lever downward until it locks the printhead in place.
If using… Then…
Direct Thermal media (no ribbon needed) Continue with step 8.
Thermal Transfer media (ribbon needed)
a. If you have not already done so,
load ribbon in the printer. See
Load the Ribbon on page 58.
b. Continue with step 8.
To Next Page
Loading...