30
Station No.8
Faulted Low
Station No.8 Control Head’s lever position is out of range.
The input appears to be too low.
31
Station No.9
Faulted Low
Station No.9 Control Head’s lever position is out of range.
The input appears to be too low.
32
Station No.10
Faulted Low
Station No.10 Control Head’s lever position is out of range.
The input appears to be too low.
33
Station No.1
Button Stuck Closed
Station No.1 Control Head’s Transfer Button has either been closed too long or has been
closed since power-up.
34
Station No.2
Button Stuck Closed
Station No.2 Control Head’s Transfer Button has either been closed too long or has been
closed since power-up.
35
Station No.3
Button Stuck Closed
Station No.3 Control Head’s Transfer Button has either been closed too long or has been
closed since power-up.
36
Station No.4
Button Stuck Closed
Station No.4 Control Head’s Transfer Button has either been closed too long or has been
closed since power-up.
37
Station No.5
Button Stuck Closed
Station No.5 Control Head’s Transfer Button has either been closed too long or has been
closed since power-up.
38
Station No.6
Button Stuck Closed
Station No.6 Control Head’s Transfer Button has either been closed too long or has been
closed since power-up.
39
Station No.7
Button Stuck Closed
Station No.7 Control Head’s Transfer Button has either been closed too long or has been
closed since power-up.
40
Station No.8
Button Stuck Closed
Station No.8 Control Head’s Transfer Button has either been closed too long or has been
closed since power-up.
41
Station No.9
Button Stuck Closed
Station No.9 Control Head’s Transfer Button has either been closed too long or has been
closed since power-up.
42
Station No.10
Button Stuck Closed
Station No.10 Control Head’s Transfer Button has either been closed too long or has been
closed since power-up.
43
CAN Communication
Stuffing Error
The Control-Area-Network protocol has detected an error in communication with other
devices on the network. The error type is a stuffing error.
44
CAN Communication
Form Error
The Control-Area-Network protocol has detected an error in communication with other
devices on the network. The error type is a form error.
45
CAN Communication
Acknowledge Error
The Control-Area-Network protocol has detected an error in communication with other
devices on the network. The error type is an acknowledge error.
46
CAN Communication
Bit 1 Error
The Control-Area-Network protocol has detected an error in communication with other
devices on the network. The error type is a Bit 1 error.
47
CAN Communication
Bit 0 Error
The Control-Area-Network protocol has detected an error in communication with other
devices on the network. The error type is a Bit 0 error.
48
CAN Communication
CRC Error
The Control-Area-Network protocol has detected an error in communication with other
devices on the network. The error type is a CRC error.
49
CAN Communication
Bus Error
The Control-Area-Network protocol has detected an error in communication with other
devices on the network. The error type is a Bus failure error. The error cannot be
recovered from without cycling power to the Processor.
Table 10-6: Basic Control System Error Codes
Error
No.
Title Description
To Next Page
Loading...
Need help?
General
