ZOE PPM3 - Page 209

April 2019 Nightingale PPM3 User's Guide 24-11
Technical Data
Electromagnetic Compatibility (EMC) Information
Medical electrical equipment requires special precautions regarding
Electromagnetic Compatibility (EMC). Portable and mobile Radio Frequency
(RF) communications equipment can affect devices like the Nightingale PPM3.
As such, the Nightingale PPM3 should not be used adjacent to other equipment. If
this is not practical, then observe the Nightingale PPM3 to make sure it is
operating properly after installation.
Also, the use of accessories other than those recommended by Zoe Medical may
result in increased EMC emissions or decreased EMC immunity of the
Nightingale PPM3.
Guidance and manufacturer’s declaration: electromagnetic emissions
The Nightingale PPM3 is intended for use in the electromagnetic environment specified below.
The user of the Nightingale PPM3 should assure that it is used in such an environment.
Emissions test
Compliance
Electromagnetic environment / guidance
RF emissions
CISPR 11
Group 1
The Nightingale PPM3 uses RF energy only for its
internal function. Therefore, its RF emissions are
very low and are not likely to cause any
interference in nearby electronic equipment.
RF emissions
CISPR 11
Class B
The Nightingale PPM3 is suitable for use in all
establishments including domestic and those
directly connected to the public low-voltage power
supply network that supplies buildings used for
domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Complies