Service Kit Installation Procedures
906-0731-04-01 Rev. C ZOLL Ventilator Service Manual 4–45
18 Attach the back case to the ventilator module and
align cover with handle, air intake housing and
dovetail mounting studs.
Insert and tighten the four 6-32 x 2” screws and
then the two 10-32 Keps nuts.
19 Tighten the four 8-32 x 3 screws on the outer air
intake.
20 Re-certify the ventilator using the RCS.
Step Action
To Next Page
Loading...
