906-0731-04-01 Rev. C ZOLL Ventilator Service Manual 4–1
Chapter 4
Service Kit Installation Procedures
About Service Kits
Service kits are factory-tested sub-assemblies used to facilitate ventilator servicing and repair. Service kits are
available only to ZOLL trained and certified service personnel. For additional information on availability of ZOLL
Technical training programs, please contact techtraining@zoll.com.
This chapter provides information on Ventilator Service Kits, including:
• A list of Service Kits available
• A list of supplies to stock on-hand.
• Torque Specification Guide
• General Service Kit installation instructions, warnings, and cautions
• Service Kit installation instructions
Service Kit Installation Guidelines, Cautions and Warnings
Observe the following guidelines, cautions and warnings before installing any Service Kit.
• Ensure that the problem is not accessory-related. Check the integrity of all tubing, fittings, and verify that
tubing is not crimped or cracked.
• Be aware of potentially dangerous operating voltages.
• Disconnect the power supply and internal battery prior to servicing.
• Please review all warnings listed in the following documents:
• Service Kits requiring electrical safety testing
• ZOLL Ventilator Operator’s Guide
• RCS Operator’s Manual
Chapter 4
Service Kit Installation Procedures
To Next Page
Loading...
