Service Kit Installation Procedures
906-0731-04-01 Rev. C ZOLL Ventilator Service Manual 4–75
Oxygen Valve Assembly Service Kit Installation Instructions
Kit Numbers (ALL MODELS)
• 712-0731-42
Required Tools
• Torque driver with #1 Phillips bit
CAUTION / WARNING!
Replacement of the Oxygen Valve Assembly requires the handling of Oxygen Clean Parts. When handling any
metal components within the ventilator which are responsible for transporting oxygen, take the following
precautions:
• Never touch the components with your bare hands as oils and residue may contaminate the
component.
• Keep all Oxygen Clean parts in their protective packaging prior to installation.
• Do not keep sources of contaminate on the workbench such as soldering material.
• If an oxygen clean part becomes contaminated, replace the part and do not attempt to clean it.
To Next Page
Loading...
