Service Kit Installation Procedures
4–46 www.zoll.com 906-0731-04-01 Rev. C
Connector Panel Service Kit Installation Instructions
Required Tools
• Torque driver with #1 and #2 Phillips bits
• Nut driver set
• Needle-nosed pliers
• 5/16” open-ended wrench
Kit Contents
Quantity Description Depiction
1 Connector Panel Assembly
3 8-32 x 1/4 Screw
4 6-32 Keps Nut
2 O-Ring ½” OD x 3/8” ID
To Next Page
Loading...
