LTE3302-M432 & LTE3312-M432 User’s Guide
109
CHAPTER 13
Interface Group
13.1 Overview
By default, the four LAN interfaces on the LTE Device are in the same group and can communicate with
each other. Creating a new interface will create a new LAN bridge interface (subnet) (for example,
192.168.2.0/24) that acts as a dependent LAN network, and is a different subnet from default LAN
subnet (192.168.1.0/24).
13.2 Interface Group Screen
You can manually add a LAN/WLAN interface to a new group.
Use the DHCP screen to configure the private IP addresses the DHCP server on the LTE Device assigns to
the clients in the default and/or user-defined groups. See Chapter 9 on page 90 for more information.
Use the Interface Group screen to create a new interface group, which is a new LAN bridge interface
(subnet). Click Configuration > Network > Interface Group to open the following screen.
Figure 75 Configuration > Network > Interface Group
The following table describes the fields in this screen.
Table 48 Configuration > Network > Interface Group
LABEL DESCRIPTION
Add Click this button to create a new interface group.
Interface Grouping Rules
Name This shows the descriptive name of the group.
LAN Interface This shows the interface group.
VID This shows the VLAN ID number (from 0 to 4094) of the interface group.
Modify Click the Delete icon to remove the user-defined group.
To Next Page
Loading...
