LTE3302-M432 & LTE3312-M432 User’s Guide
68
CHAPTER 7
Wireless LAN
7.1 Overview
This chapter discusses how to configure the wireless network settings in your LTE Device.
The following figure provides an example of a wireless network.
Figure 41 Example of a Wireless Network
The wireless network is the part in the blue circle. In this wireless network, devices A and B are called
wireless clients. The wireless clients use the access point (AP) to interact with other devices (such as the
printer) or with the Internet. Your LTE Device is the AP.
7.1.1 What You Can Do
• Use the General screen to turn the wireless connection on or off, set up wireless security between the
LTE Device and the wireless clients, and make other basic configuration changes (Section 7.2 on
page 71).
• Use the More AP screen to set up multiple wireless networks on your LTE Device (Section 7.4 on page
78).
• Use the MAC Filter screen to allow or deny wireless stations based on their MAC addresses from
connecting to the LTE Device (Section 7.5 on page 80).
To Next Page
Loading...
