Chapter 4 Tutorials
LTE3302-M432 & LTE3312-M432 User’s Guide
35
4.2.2 PIN Configuration
When you use the PIN configuration method, you need to check the client’s PIN number and use the LTE
Device’s configuration interface.
1 Go to your phone settings and turn on Wi-Fi. Open the Wi-Fi networks list and tap WPS PIN Entry get a PIN
number.
2 Enter the client’s PIN number to the PIN field in the Configuration > Network > Wireless LAN > WPS Station
screen on the LTE Device.
3 Click Start button (or button next to the PIN field) on the LTE Device’s WPS Station screen within two
minutes.
The LTE Device authenticates the wireless client and sends the proper configuration settings to the
wireless client. This may take up to two minutes. Then the wireless client is able to communicate with the
LTE Device securely.
The following figure shows you the example to set up wireless network and security on LTE Device and
wireless client (ex. the Android smartphone in this example) by using PIN method.
To Next Page
Loading...
