ZyXEL Communications LTE3302-M432 - Introducing the Web Configurator; Overview; Accessing the Web Configurator; Login Screen

LTE3302-M432 & LTE3312-M432 User’s Guide
20
CHAPTER 2
Introducing the Web
Configurator
2.1 Overview
This user’s guide uses the LTE3312-M432 screens as examples. The screens may vary slightly for different
models.
This chapter describes how to access the LTE Device Web Configurator and provides an overview of its
screens.
The Web Configurator is an HTML-based management interface that allows easy setup and
management of the LTE Device via Internet browser. The recommended screen resolution is 1024 by 768
pixels. In order to use the Web Configurator successfully, use the supported browsers as shown below:
• Internet Explorer 9.0 and later versions
• Mozilla Firefox 21 and later versions
• Safari 6.0 and later versions
• Google Chrome 26.0 and later versions. Web browser pop-up windows from your device. Web pop-
up blocking is enabled by default in Windows XP SP (Service Pack) 2.
• JavaScript (enabled by default).
• Java permissions (enabled by default).
Refer to your browser help to see how to make sure these functions are allowed.
2.2 Accessing the Web Configurator
1 Make sure your LTE Device hardware is properly connected and prepare your computer or computer
network to connect to the LTE Device (refer to the Quick Start Guide).
2 Launch your web browser.
3 Type "http://192.168.1.1" as the website address.
Your computer must be in the same subnet in order to access this website address.
2.2.1 Login Screen
The Web Configurator initially displays the following login screen.