ZyXEL Communications LTE3302-M432 - Status Screen

Chapter 2 Introducing the Web Configurator
LTE3302-M432 & LTE3312-M432 User’s Guide
25
2.4 Status Screen
Click to open the Status screen.
Remote MGMT WWW Use this screen to configure through which interface(s) and from which IP
address(es) users can use HTTP to manage the LTE Device.
Remote
Management
Use this screen to configure from which IP address(es) users can access the LTE
Device.
Bandwidth
Management
General Use this screen to enable bandwidth management.
Advanced Use this screen to set the upstream bandwidth and edit a bandwidth
management rule.
UPnP UPnP Use this screen to enable UPnP on the LTE Device.
TR069 TR069 Use this screen to configure your LTE Device to be managed by an ACS.
Maintenance
General General Use this screen to view and change administrative settings such as system and
domain names.
Account User Account Use this screen to change the user name and password of your LTE Device.
Time Time Setting Use this screen to change your LTE Device’s time and date.
Firmware
Upgrade
Firmware
Upgrade
Use this screen to upload router firmware to your LTE Device.
Module
Upgrade
Module
Upgrade
Use this screen to upload LTE module firmware to your LTE Device.
Backup/
Restore
Backup/
Restore
Use this screen to backup and restore the configuration or reset the factory
defaults to your LTE Device.
Restart System Restart This screen allows you to reboot the LTE Device without turning the power off.
Table 7 Navigation Panel (continued)
LINK TAB FUNCTION