EasyManua.ls Logo

ZyXEL Communications LTE3302-M432 - Page 24

ZyXEL Communications LTE3302-M432
202 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 2 Introducing the Web Configurator
LTE3302-M432 & LTE3312-M432 User’s Guide
24
Wireless LAN General Use this screen to enable the wireless LAN and configure wireless LAN and
wireless security settings.
More AP Use this screen to configure multiple BSSs on the LTE Device.
MAC Filter Use the MAC filter screen to allow or deny wireless stations based on their MAC
addresses from connecting to the LTE Device.
Advanced This screen allows you to configure advanced wireless LAN settings.
QoS Use this screen to configure Wi-Fi Multimedia Quality of Service (WMM QoS).
WMM QoS allows you to prioritize wireless traffic according to the delivery
requirements of individual services.
WPS Use this screen to configure the WPS settings.
WPS Station Use this screen to add a wireless station using WPS.
Scheduling Use this screen to schedule the times the Wireless LAN is enabled.
WDS Use this screen to enable and configure the WDS settings.
LAN IP Use this screen to configure LAN IP address and subnet mask.
DHCP Server General Use this screen to enable the LTE Device’s DHCP server.
Advanced Use this screen to assign IP addresses to specific individual computers based
on their MAC addresses and to have DNS servers assigned by the DHCP server.
Client List Use this screen to view information related to your DHCP status.
NAT General Use this screen to enable NAT.
Port
Forwarding
Use this screen to configure servers behind the LTE Device and forward
incoming service requests to the server(s) on your local network.
Port Trigger Use this screen to change your LTE Device’s port triggering settings.
ALG Use this screen to enable or disable SIP (VoIP) ALG (Application Layer
Gateway) in the LTE Device.
Dynamic DNS Dynamic DNS Use this screen to set up dynamic DNS.
Routing Static Route Use this screen to configure IP static routes.
Dynamic
Routing
Use this screen to enable and configure RIP on the LTE Device.
Interface
Group
Interface
Group
Use this screen to create a new interface group.
Security
Firewall General Use this screen to activate/deactivate the firewall.
Services This screen shows a summary of the firewall rules, and allows you to edit/add a
firewall rule.
Content Filter Content Filter Use this screen to restrict web features and designate a trusted computer. You
can also block certain web sites containing certain keywords in the URL.
IPv6 firewall Services Use this screen to configure IPv6 firewall rules.
Application
SMS Use this screen to send SMS text messages and view messages received on the
LTE Device.
Voice over 3G
(LTE3312-M432
only)
General Use this screen to enable Internet phone calls through the LTE Device.
Call Conf. Use this screen to create rules for handling incoming calls.
Management
Table 7 Navigation Panel (continued)
LINK TAB FUNCTION

Table of Contents

Other manuals for ZyXEL Communications LTE3302-M432

Related product manuals