Chapter 5 Monitor
LTE3302-M432 & LTE3312-M432 User’s Guide
53
5.5 ARP Table
Address Resolution Protocol (ARP) is a protocol for mapping an Internet Protocol address (IP address) to
a physical machine address, also known as a Media Access Control or MAC address, on the local area
network.
Use the ARP table to view IP-to-MAC address mapping(s).
Figure 29 Monitor > ARP Table
The following table describes the labels in this screen.
5.6 Packet Statistics
Click Monitor > Packet Statistics or the Packet Statistics (Details...) hyperlink in the Status screen. Read-
only information here includes port status, packet specific statistics and the "system up time". The Poll
Interval(s) field is configurable and is used for refreshing the screen.
Table 11 System Monitor > ARP Table
LABEL DESCRIPTION
# This is the ARP table entry number.
IP Address This is the learned IPv4 or IPv6 IP address of a device connected to a port.
MAC Address This is the MAC address of the device with the listed IP address.
Device This is the type of interface used by the device.
br0 indicates a LAN interface where 0 represents LAN1 or LAN2.
State This column shows the status of the mapping.
Refresh Click Refresh to update this screen.
To Next Page
Loading...
