Chapter 7 Wireless LAN
LTE3302-M432 & LTE3312-M432 User’s Guide
79
The following table describes the labels in this screen.
7.4.1 More AP Edit
Use this screen to edit an SSID profile. Click the Edit icon next to an SSID in the More AP screen. The
following screen displays.
Figure 48 Configuration > Network > Wireless LAN > More AP: Edit
The following table describes the labels in this screen.
Table 26 Configuration > Network > Wireless LAN > More AP
LABEL DESCRIPTION
# This is the index number of each SSID profile.
Status This shows whether the SSID profile is active (a yellow bulb) or not (a gray bulb).
SSID An SSID profile is the set of parameters relating to one of the LTE Device’s BSSs. The SSID (Service
Set IDentifier) identifies the Service Set with which a wireless device is associated.
This field displays the name of the wireless profile on the network. When a wireless client scans
for an AP to associate with, this is the name that is broadcast and seen in the wireless client
utility.
Security This field indicates the security mode of the SSID profile.
Edit Click the Edit icon to configure the SSID profile.
Table 27 Configuration > Network > Wireless LAN > More AP: Edit
LABEL DESCRIPTION
Wireless Setup
Active Select this to activate the SSID profile.
Name (SSID) The SSID (Service Set IDentity) identifies the Service Set with which a wireless client is associated.
Enter a descriptive name (up to 32 printable characters found on a typical English language
keyboard) for the wireless LAN.
Hide SSID Select this check box to hide the SSID in the outgoing beacon frame so a station cannot obtain
the SSID through scanning using a site survey tool.
To Next Page
Loading...
