Chapter 23 Maintenance
LTE3302-M432 & LTE3312-M432 User’s Guide
151
The following table describes the labels in this screen.
23.8 Configuration Backup/Restore Screen
Backup configuration allows you to back up (save) the LTE Device’s current configuration to a file on
your computer. Once your LTE Device is configured and functioning properly, it is highly recommended
that you back up your configuration file before making configuration changes. The backup
configuration file will be useful in case you need to return to your previous settings.
Restore configuration allows you to upload a new or previously saved configuration file from your
computer to your LTE Device.
Click Maintenance > Backup/Restore. Information related to factory defaults, backup configuration,
and restoring configuration appears as shown next.
Figure 111 Maintenance > Backup/Restore
The following table describes the labels in this screen.
Table 71 Maintenance > Module Upgrade
LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click Choose File to find it.
Choose File Click Choose File to find the .bin file you want to upload. Remember that you must decompress
compressed (.zip) files before you can upload them.
Upload Click Upload to begin the upload process. This process may take up to two minutes.
Table 72 Maintenance > Backup/Restore
LABEL DESCRIPTION
Backup Click Backup to save the LTE Device’s current configuration to your computer.
File Path Type in the location of the file you want to upload in this field or click Choose File to find it.
Choose File Click Choose File to find the file you want to upload.
To Next Page
Loading...
Need help?
General
