ZyXEL Communications LTE3302-M432 - Configure Content Filtering

Chapter 4 Tutorials
LTE3302-M432 & LTE3312-M432 User’s Guide
45
• Protocol: Select the protocol (TCP, UDP or ICMP) used to transport the packets.
• Dest Port Range: Enter the port number/range of the destination that define the traffic type.
• Source Port Range: Enter the port number/range of the source that define the traffic type.
5 Select the Enable Firewall Rule check box to activate the rules you created, and click Apply.
4.7 Configure Content Filtering
You can block certain web features and specific website addresses.
1 Go to the Configuration > Security > Content Filter screen.
2 Select a web feature that you want to block in the Restrict Web Features section.
3 Enter a keyword in the Keyword field to block web sites containing the keyword, and click Add.
4 Select the Enable URL Keyword Blocking check box. Click Apply.