Chapter 4 Tutorials
LTE3302-M432 & LTE3312-M432 User’s Guide
39
8 If the wireless client keeps trying to connect to or acquiring an IP address from the LTE Device, make sure
you entered the correct security key.
If the connection has limited or no connectivity, make sure the DHCP server is enabled on the LTE
Device.
If your connection is successful, open your Internet browser and enter http://www.zyxel.com or the URL
of any other web site in the address bar. If you are able to access the web site, your wireless connection
is successfully configured.
4.4 Use Multiple SSIDs on the LTE Device
You can configure more than one SSID on a LTE Device. See Section 7.4 on page 78.
This allows you to configure multiple independent wireless networks on the LTE Device as if there were
multiple APs (virtual APs). Each virtual AP has its own SSID, and wireless security type. That is, each SSID on
the LTE Device represents a different access point/wireless network to wireless clients in the network.
Clients can associate only with the SSIDs for which they have the correct security settings. Clients using
different SSIDs can access the Internet and the wired network behind the LTE Device (such as a printer).
For example, you may set up three wireless networks (A, B and C) in your office. A is for workers, B is for
guests and C is specific to a VoIP device in the meeting room.
4.4.1 Configuring Security Settings of Multiple SSIDs
The LTE Device is in router mode by default.
To Next Page
Loading...
