Chapter 19 Remote Management
LTE3302-M432 & LTE3312-M432 User’s Guide
130
Port This is the port number that the computer must use to access the LTE Device. If the HTTP Port
number was changed to 8080 in the Configuration > Management > Remote MGMT > WWW
screen, then this computer should use the same number. For example http://1.1.1.1:8080 where
1.1.1.1 is the IP address of the LTE Device.
Cancel Click Cancel to restore your previously saved settings.
Apply Click Apply to save your changes back to the LTE Device.
Table 60 Configuration > Management > Remote MGMT > Remote Management
LABEL DESCRIPTION
To Next Page
Loading...
