ZyXEL Communications LTE3302-M432 - Page 148

Chapter 23 Maintenance
LTE3302-M432 & LTE3312-M432 User’s Guide
148
Figure 107 Maintenance > Time
The following table describes the labels in this screen.
Table 69 Maintenance > Time
LABEL DESCRIPTION
Current Time and Date
Current Time This field displays the time of your LTE Device.
Each time you reload this page, the LTE Device synchronizes the time with the time server.
Current Date This field displays the date of your LTE Device.
Each time you reload this page, the LTE Device synchronizes the date with the time server.
Current Time and Date
Manual Select this radio button to enter the time and date manually. If you configure a new time
and date, Time Zone and Daylight Saving at the same time, the new time and date you
entered has priority and the Time Zone and Daylight Saving settings do not affect it.
New Time
(hh:mm:ss)
This field displays the last updated time from the time server or the last time configured
manually.
When you select Manual, enter the new time in this field and then click Apply.
New Date
(yyyy/mm/dd)
This field displays the last updated date from the time server or the last date configured
manually.
When you select Manual, enter the new date in this field and then click Apply.
Get from Time Server Select this radio button to have the LTE Device get the time and date from the time server
you specified below.
User Defined Time
Server Address
Select User Defined Time Server Address and enter the IP address or URL (up to 20 extended
ASCII characters in length) of your time server. Check with your ISP/network administrator if
you are unsure of this information.
Time Zone Setup