Chapter 3 Setup Wizard
LTE3302-M432 & LTE3312-M432 User’s Guide
31
4 Use this screen to enable or disable the LTE Device’s wireless LAN, and enter the wireless network name
(SSID). Select a channel or use Auto to have the LTE Device automatically determine a channel to use.
Click Next.
Figure 19 Wizard: Wireless Settings
5 Select WPA2-PSK and enter a pre-shared key from 8 to 63 case-sensitive characters for data encryption.
The wireless clients which want to associate with this wireless network must have the same wireless
security settings. Otherwise, select No Security to allow any client to associate with this network without
any data encryption or authentication. Click Next.
Figure 20 Wizard: Wireless Security
6 Use the read-only summary table to check whether what you have configured is correct. Click Apply
Settings to save your settings. Otherwise, click Back to go back to the previous screens.
To Next Page
Loading...
