ZyXEL Communications LTE3311 series - SIP Configuration Screen

Chapter 17 Voice over IP
LTE3311 Series User’s Guide
123
Figure 79 Application > Voice over IP > Phone Conf.: Call Feature Speed Dial Digits
The following table describes the labels in this screen.
17.7 SIP Configuration Screen
The LTE3311 uses a SIP account to make outgoing VoIP calls and check if an incoming call’s
destination number matches your SIP account’s SIP number. In order to make or receive a VoIP
Table 56 Application > Voice over IP > Phone Conf.: Call Feature Speed Dial Digits
LABEL DESCRIPTION
Blind Call Transfer Transfer an incoming call (that you have answered) to another phone, without talking to
him/her.
Attended Call
Transfer
Call the number to which you want to transfer a call, speak with him/her and then
transfer the call.
Anonymous Call
Enable
Hide your name and phone number for the call.
Anonymous Call
Disable
Display your name and phone number for the call.
Anonymous Call Per
Call Basis
Disable caller ID on a per call basis.
DND Enable
Set your phone to not ring when someone calls you.
DND Disable Allow your phone to ring when someone calls you.
Call Forwarding
Enable
Allow the LTE3311 to forward all incoming calls to the specified phone number.
Call Forwarding
Disable
Set the LTE3311 to not forward any incoming calls.
Call Return Place a call to the last person who called you.
Apply
Click this to save your changes and to apply them to the LTE3311.
Cancel Click this to set every field in this screen to its last-saved value.
Back Click this to return to the previous screen.