ZyXEL Communications LTE3311 series - LAN IP Screen

Chapter 8 LAN
LTE3311 Series User’s Guide
85
Figure 50 LAN and WAN IP Addresses
The LAN parameters of the LTE3311 are preset in the factory with the following values:
• IP address of 192.168.1.1 with subnet mask of 255.255.255.0 (24 bits)
• DHCP server enabled with 32 client IP addresses starting from 192.168.1.33.
These parameters should work for the majority of installations. If your ISP gives you explicit DNS
server address(es), read the embedded Web Configurator help regarding what fields need to be
configured.
8.4 LAN IP Screen
Use this screen to change the IP address for your LTE3311. Click Network > LAN > IP.
Figure 51 Network > LAN > IP
The following table describes the labels in this screen.
Table 33 Network > LAN > IP
LABEL DESCRIPTION
IP Address Type the IP address of your LTE3311 in dotted decimal notation.
IP Subnet Mask The subnet mask specifies the network number portion of an IP address. Your LTE3311
will automatically calculate the subnet mask based on the IP address that you assign.
Unless you are implementing subnetting, use the subnet mask computed by the
LTE3311.
Apply Click Apply to save your changes back to the LTE3311.
Cancel Click Cancel to begin configuring this screen afresh.