LTE3301 Series User’s Guide
190
APPENDIX C
Setting Up Your Computer’s IP Address
Note: Your specific LTE3301 may not support all of the operating systems described in
this appendix. See the product specifications for more information about which
operating systems are supported.
This appendix shows you how to configure the IP settings on your computer in order for it to be
able to communicate with the other devices on your network. Windows Vista/XP/2000, Mac OS 9/
OS X, and all versions of UNIX/LINUX include the software components you need to use TCP/IP on
your computer.
If you manually assign IP information instead of using a dynamic IP, make sure that your network’s
computers have IP addresses that place them in the same subnet.
In this appendix, you can set up an IP address for:
• Windows XP/NT/2000 on page 190
• Windows Vista on page 193
• Windows 7 on page 196
• Mac OS X: 10.3 and 10.4 on page 200
• Mac OS X: 10.5 and 10.6 on page 203
• Linux: Ubuntu 8 (GNOME) on page 206
• Linux: openSUSE 10.3 (KDE) on page 210
Windows XP/NT/2000
The following example uses the default Windows XP display theme but can also apply to Windows
2000 and Windows NT.
1 Click Start > Control Panel.
To Next Page
Loading...
