Chapter 20 NAS
LTE3311 Series User’s Guide
145
Figure 94 Application > NAS > File Sharing
The following table describes the labels in this screen.
20.3 FTP Screen
Use this screen to set up file sharing via the LTE3311 using FTP.
Click Application > NAS > FTP to open the following screen.
Figure 95 Application > NAS > FTP
Table 68 Application > NAS > File Sharing
LABEL DESCRIPTION
File Sharing
Network Attached
Storage Name
Specify the name to identify the LTE3311 in a work group.
Work Group You can add the LTE3311 to an existing or a new workgroup on your network. Enter the
name of the workgroup which your LTE3311 automatically joins. You can set the
LTE3311’s workgroup name to be exactly the same as the workgroup name to which
your computer belongs to.
Note: The LTE3311 will not be able to join the workgroup if your local area network has
restrictions set up that do not allow devices to join a workgroup. In this case, contact
your network administrator.
Server Comment Enter the description of the LTE3311 in a work group.
Apply Click Apply to save your changes back to the LTE3311.
Cancel Click Cancel to begin configuring this screen afresh.
To Next Page
Loading...
