Chapter 20 NAS
LTE3311 Series User’s Guide
146
The following table describes the labels in this screen.
20.3.1 Example of Accessing Your Shared Files From a Computer
You can use Windows Explorer or FTP to access the USB storage devices connected to the LTE3311.
Use Windows Explorer to Share Files
Open Windows Explorer to access the connected USB device using either Windows Explorer browser
or by browsing to your workgroup.
Note: This example shows you how to use Microsoft’s Windows 7 to browse your shared
files. Refer to your operating system’s documentation for how to browse your file
structure.
Table 69 Application > NAS > FTP
LABEL DESCRIPTION
FTP Select to enable or disable the FTP server on the LTE3311 for file sharing using FTP.
FTP Port You may change the server port number for FTP if needed, however you must use the
same port number in order to use that service for file sharing.
FTP Max
Connection per IP
Select the maximum number of FTP connections that are allowed from a single IP
address.
FTP MAX Client Select the maximum number of FTP clients that are allowed to connect to the FTP
server.
Client Support
UTF8
Set whether the FTP clients support UTF-8 encoding.
Code page If you select No in the Client Support UTF8 field, select a code page being used for
the connection.
Apply Click Apply to save your changes back to the LTE3311.
Cancel Click Cancel to begin configuring this screen afresh.
To Next Page
Loading...
