LTE3311 Series User’s Guide
143
CHAPTER 20
NAS
20.1 Overview
This chapter shows you how to configure file sharing.
20.1.1 What You Can Do
•Use the File Sharing screen to allow file sharing via the LTE3311 using Windows Explorer, the
workgroup name (Section 20.2.1 on page 144).
•Use the FTP screen to allow file sharing via the LTE3311 using FTP (Section 20.3 on page 145).
20.1.2 What You Need To Know
The following terms and concepts may help as you read through this chapter.
Workgroup name
This is the name given to a set of computers that are connected on a network and share resources
such as a printer or files. Windows automatically assigns the workgroup name when you set up a
network.
Samba
SMB is a client-server protocol used by Microsoft Windows systems for sharing files, printers, and
so on.
Samba is a free SMB server that runs on most Unix and Unix-like systems. It provides an
implementation of an SMB client and server for use with non-Microsoft operating systems.
File Transfer Protocol
This is a method of transferring data from one computer to another over a network such as the
Internet.
20.1.3 Before You Begin
Make sure the LTE3311 is connected to your network and turned on.
1 Connect the USB device to one of the LTE3311’s USB ports.
To Next Page
Loading...
