Chapter 5 Monitor
LTE3311 Series User’s Guide
49
Figure 23 Monitor > Packet Statistics
The following table describes the labels in this screen.
5.6 WLAN Station Status
Click Monitor > WLAN Station Status or the WLAN Station Status (Details...) hyperlink in the
Status screen. View the wireless stations that are currently associated to the LTE3311’s 2.4GHz
wireless network in the Association List. Association means that a wireless client (for example,
your network or computer with a wireless network card) has connected successfully to the AP (or
wireless router) using the same SSID, channel and security settings.
Table 10 Monitor > Packet Statistics
LABEL DESCRIPTION
Port This is the LTE3311’s interface type.
Status For the LAN ports, this displays the port speed and duplex setting or Down when the
line is disconnected.
For the WAN port, it displays Up when the mobile data connection is up, Connecting
when the LTE3311 is trying to bring the mobile data connection up, and displays Down
when the 3G/4G connection is down or not activated.
For the WLAN, it displays the maximum transmission rate when the WLAN is enabled
and Down when the WLAN is disabled.
TxPkts This is the number of transmitted packets on this port.
RxPkts This is the number of received packets on this port.
Collisions This is the number of collisions on this port.
Tx B/s This displays the transmission speed in bytes per second on this port.
Rx B/s This displays the reception speed in bytes per second on this port.
Up Time This is the total time the LTE3311 has been for each session.
System Up Time This is the total time the LTE3311 has been on.
Poll Interval(s) Enter the time interval in seconds for refreshing statistics in this field.
Set Interval Click this button to apply the new poll interval you entered in the Poll Interval(s)
field.
Stop Click Stop to stop refreshing statistics.
To Next Page
Loading...
