Chapter 4 Tutorials
LTE3311 Series User’s Guide
40
7 Check the status of your wireless connection in the screen below.
8 If the wireless client keeps trying to connect to or acquiring an IP address from the LTE3311, make
sure you entered the correct security key.
If the connection has limited or no connectivity, make sure the DHCP server is enabled on the
LTE3311.
If your connection is successful, open your Internet browser and enter http://www.zyxel.com or the
URL of any other web site in the address bar. If you are able to access the web site, your wireless
connection is successfully configured.
4.4 Using Multiple SSIDs on the LTE3311
You can configure more than one SSID on a LTE3311. See Section 7.4 on page 74.
This allows you to configure multiple independent wireless networks on the LTE3311 as if there
were multiple APs (virtual APs). Each virtual AP has its own SSID, and wireless security type. That
is, each SSID on the LTE3311 represents a different access point/wireless network to wireless
clients in the network.
Clients can associate only with the SSIDs for which they have the correct security settings. Clients
using different SSIDs can access the Internet and the wired network behind the LTE3311 (such as a
printer).
To Next Page
Loading...
