ZyXEL Communications LTE3311 series - Page 24

Chapter 2 Introducing the Web Configurator
LTE3311 Series User’s Guide
24
NAT General Use this screen to enable NAT.
Port
Forwarding
Use this screen to configure servers behind the LTE3311 and forward
incoming service requests to the server(s) on your local network.
Port Trigger Use this screen to change your LTE3311’s port triggering settings.
ALG Use this screen to enable or disable SIP (VoIP) ALG (Application Layer
Gateway) in the LTE3311.
Dynamic
DNS
Dynamic DNS Use this screen to set up dynamic DNS.
Routing Static Route Use this screen to configure IP static routes.
Dynamic
Routing
Use this screen to enable and configure RIP on the LTE3311.
Interface
Group
Interface
Group
Use this screen to create a new interface group.
Security
Firewall General Use this screen to activate/deactivate the firewall.
Services This screen shows a summary of the firewall rules, and allows you to edit/
add a firewall rule.
Content
Filter
Content Filter Use this screen to restrict web features and designate a trusted computer.
You can also block certain web sites containing certain keywords in the
URL.
IPv6 firewall Services Use this screen to configure IPv6 firewall rules.
Application
Voice over IP General Use this screen to enable VoIP, NAT traversal and dialing plan on the
LTE3311.
Phone Book Use this screen to manage your VoIP contact names and phone numbers.
Speed Dial Use this screen to set up shortcuts for dialing frequently-used (VoIP) phone
numbers.
Phone Conf. Use this screen to configure call features.
SIP Conf. Use this screen to set up information about your SIP account, and
configure the SIP server information.
Voice over
3G
General Use this screen to enable Vo3G on the LTE3311.
Phone Book Use this screen to manage your Vo3G contact names and phone numbers.
Telephone
Conf.
Use this screen to configure call features.
Call Conf. Use this screen to maintain rules for handling incoming calls.
SMS SMS Use this screen to send new messages and view messages received on the
LTE3311.
NAS File Sharing Use this screen to allow file sharing via the LTE3311 using Windows
Explorer, the workgroup name.
FTP Use this screen to allow file sharing via the LTE3311 using FTP.
Management
Bandwidth
Management
General Use this screen to enable bandwidth management.
Advanced Use this screen to set the upstream bandwidth and edit a bandwidth
management rule.
UPnP UPnP Use this screen to enable UPnP on the LTE3311.
TR069 TR069 Use this screen to configure your LTE3311 to be managed by an ACS.
Table 6 Navigation Panel (continued)
LINK TAB FUNCTION