Chapter 2 Introducing the Web Configurator
LTE3311 Series User’s Guide
27
VoIP This shows the current registration status of the SIP account. It also shows the current state
of the phone call.
• ready: VoIP is enabled and a SIP account is registered for the phone port.
• not ready: VoIP is disabled or there is no SIP account registered for the phone port.
• busy: There is a VoIP call in progress or the callee’s line is busy.
• ringing: The phone is ringing for an incoming VoIP call.
• dialing: The callee’s phone is ringing.
• off hook: The callee hung up or your phone was left off the hook.
Vo3G This shows the current state of the phone call.
• ready: Voice over 3G (Vo3G) is enabled and the 3G connection is up.
• not ready: Voice over 3G (Vo3G) is disabled and the 3G connection is down.
• busy: There is a Vo3G call in progress or the callee’s line is busy.
• ringing: The phone is ringing for an incoming Vo3G call.
• dialing: The callee’s phone is ringing.
• off hook: The callee hung up or your phone was left off the hook.
N/A means Voice over 3G (Vo3G) is disabled.
Summary
Packet Statistics Click Details... to go to the Monitor > Packet Statistics screen (Section 5.5 on page 48).
Use this screen to view port status and packet specific statistics.
WLAN Station Status Click Details... to go to the Monitor > WLAN Station Status screen (Section 5.6 on page
49). Use this screen to view the wireless stations that are currently associated to the
LTE3311’s 2.4GHz wireless LAN.
LTE Modem Status Click Details... to go to the Monitor > LTE Modem Status screen (Section 5.7 on page
50). Use this screen to view the detailed information about the LTE module, cellular
interface, and SIM card. You can also view the LTE connection status.
System Status
Item This column shows the type of data the LTE3311 is recording.
Data This column shows the actual data recorded by the LTE3311.
System Up Time This is the total time the LTE3311 has been on.
Current Date/Time This field displays your LTE3311’s present date and time.
System Resource
- CPU Usage This displays what percentage of the LTE3311’s processing ability is currently used. When
this percentage is close to 100%, the LTE3311 is running at full load, and the throughput is
not going to improve anymore. If you want some applications to have more throughput, you
should turn off other applications (for example, using bandwidth management.)
- Memory Usage This shows what percentage of the heap memory the LTE3311 is using.
Interface Status
Interface This displays the LTE3311 port types. The port types are: WAN,
LAN and WLAN.
Status For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up or
connected).
For the 2.4GHz WLAN, it displays Up when the 2.4GHz WLAN is enabled or Down when the
2.4G WLAN is disabled.
For the USB port, it displays Up when the LTE3311 detects a USB connection or Down when
there is no USB device attached or the LTE3311 does not detect a USB connection.
Table 8 Status Screen (continued)
LABEL DESCRIPTION
To Next Page
Loading...
