Chapter 3 Setup Wizard
LTE3311 Series User’s Guide
31
Figure 12 Wizard: WAN
4 Use this screen to enable or disable the LTE3311’s wireless LAN, and enter the wireless network
name (SSID). Select a channel or use Auto to have the LTE3311 automatically determine a channel
to use. Click Next.
Figure 13 Wizard: Wireless Settings
5 Select WPA2-PSK and enter a pre-shared key from 8 to 63 case-sensitive characters for data
encryption. The wireless clients which want to associate with this wireless network must have the
same wireless security settings. Otherwise, select No Security to allow any client to associate with
this network without any data encryption or authentication. Click Next.
To Next Page
Loading...
