2N Helios IP User Manual

2N® Helios IP Control as Viewed by External User
4.1
103
Incoming Call Answer and Reject
If the automatic incoming call answer is disabled (refer to Miscellaneous), a call
coming to 2N
®
Helios IP is signalled with loud ringing. Push * to answer and # to
reject the call.
Code Door Opening (Switch Activation)
2N
®
Helios IP is equipped with a door unlocking switch. To activate the switch enter
the valid code (see Miscellaneous) on the numeric keypad.
Procedure: Enter the lock 1 or lock 2 activating code using the numeric keypad and
push *.
A valid code is signalled by a continuous switch activation (lock opening) signalling
tone. An invalid code is announced by acoustic signalling .
User Activation and Deactivation
You can activate or deactivate a user and define call routing to the user telephone
numbers using the numeric keypad. For more details refer to the Telephone Directory
subsection.
Procedure: Enter the user activation or deactivation code using the numeric keypad
and push * for confirmation.
A valid code is announced by acoustic signalling or depending on the code type.
An invalid code is announced by acoustic signalling .
Profile Activation and Deactivation
You can activate or deactivate a profile and define call routing to the telephone
numbers assigned to the profile using the numeric keypad. For more details refer to
the Scheduler subsection.
Procedure: Enter the profile activation or deactivation code using the numeric keypad
and push * for confirmation.
A valid code is announced by acoustic signalling or depending on the code type.
An invalid code is announced by acoustic signalling .

2N Helios IP Specifications

General

Type	IP Intercom
Connectivity	Ethernet
Tamper Switch	Yes
Audio	Full duplex
Microphone	Built-in
Speaker	Built-in
Camera	Yes
Power Supply	PoE
Operating Temperature	+60°C
Ingress Protection	IP54
Protocols	SIP, RTSP, ONVIF
Audio Codec	G.711, G.722
Installation	Surface mount, flush mount (depending on model)